Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Then press the "TIMER SET" button, the display is off, and the hour starts blinking
Press the "+" or "-" to adjust the hour.
Continue to press the " TIMER SET" button, the minute starts blinking
Press the "+" or "-" to adjust minute
(V) Set temperature
Then press the " TIMER SET" button, and the temperature set starts blinking. At this moment, the
temperature displayed is normally set temperature, which can be adjusted by pressing "+" or "-"
(VI) Press " TIMER SET" button to continue setting, and press "OK" complete the setting
6. Timer switch
"TIMER ON/OFF" is to control the timed opening and closing
Restart the machine after power is cut off, the week timer setting is kept, but the current date and
time must be reset
Note 1: When the week timer is power on, you should turn on the heating function, or else when
the machine is working again, there will be only the flame effect working.
Safety Cut-Off
This appliance is fitted with a safety cut-off which will operate if the fire overheats (e.g. due to
blocked air vents). For safety reasons, the fire will NOT automatically reset.
To reset the appliance, disconnect the appliance from the mains supply for at least 15 minutes.
Reconnect to the mains supply and switch on the appliance.
Troubleshooting
Symptom
No operation/ no fan.
No fire effect light.
Cleaning and Maintenance
Warning- Always disconnect from the mains supply before cleaning heater.
For general cleaning use a soft clean duster - never use harsh abrasive or cleaners.
The glass viewing screen should be cleaned carefully with a soft cloth. DO NOT use proprietary glass
cleaners.
This product does not use a standard bulb for its flame effect. The appliance uses an electronically
controlled LED system to create the effect, therefor no parts need to be replaced. There are no
user-serviceable parts on this appliance. Under no circumstances should the appliance be serviced
be anyone other than a qualified electrician.
All manuals and user guides at all-guides.com
Solution
Check if put the electric plug into the socket.
Check for safety cut-off operation.
Check the LED system by qualified electrician
18
Advertenties
Inhoudsopgave
