Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Step 8 User settings
Switch on the Mobile SMS Guard 300 module by pressing the ON/OFF button on the left-
hand side (0= OFF, I = ON). The display now reads: 'GSM SECURITY'. The module now counts
back from 90 seconds to 0. After the countdown, the following text appears: 'Normal Detect
SW: OFF'.
1. Setting the telephone number
•
Press 'Setup' and select 1 (1:TEL)
•
Enter the telephone number for the mobile phone you want to receive the text
messages on.
Attention: Press + and the country code first before you enter the rest of the number.
•
Press 'Enter' when you have entered the number.
Attention: The number has not been saved yet. See below.
•
Press the arrow up if you want to enter a second or third number (max 3 phone numbers).
•
To save the phone numbers you entered press 'Setup' again and then press 4: (4: SAVE).
The display now reads: 'Save OK!, SETUP -> Exit'.
•
Select 'Setup' to return to the Setup menu.
2. Selecting notification times
You can set the time between the moment the alarm is triggered and the moment you
receive a text message, the time between text messages and the number of times the siren
will go off.
•
Press 'Setup' and select 2 (2: TIME)
•
'SMS Delay': enter the number of seconds for the delay between alarm and text
message. Enter a time of your choice, anywhere between 0 and 99 seconds.
Attention: If you want to enter a delay shorter than 10 seconds, enter the number as
two digits, so starting with '0'.
•
Press 'Enter'.
•
Press the arrow up: 'SMS Period', set the time delay within consecutive text messages.
Enter a time of your choice, anywhere between 1 and 20 minutes.
Example: 3m means 3 minutes: a text message is sent every 3 minutes.
•
Press the arrow up: 'Buzzer delay', set the time delay before the siren should go off.
Enter a time of your choice, anywhere between 0 and 99 seconds
(e.g. 05 sec = 5 seconds after the alarm, the siren will go off).
•
Press the arrow up: 'Buzzer rep', set the length of time the siren keeps going off.
Enter a time of your choice, anywhere between 0 and 99 minutes.
•
To save all settings, press 'Setup' and select 4 (4: SAVE). The display now reads:
'Save OK!, SETUP -> Exit'.
•
Select 'Setup' to return to the Setup menu.
TIP: If you want to reset the factory settings for the notification times, press 'Setup', 2 (2:
TIME), arrow down. The display now reads: 'Set to default, Press enter key'. If you select
'Enter', all settings are reset (only the notification settings).
The standard notification times (factory settings) are:
SMS Delay time: 20 seconds
SMS period time: 3 minutes
Buzzer relay time: 20 seconds
Buzzer repeat time: 5 minutes
Close the menu by pressing 'Enter'. To save the settings, press 'Setup' and select 4
(4: SAVE). The display reads: 'Save OK!, SETUP -> Exit'.
8
All manuals and user guides at all-guides.com
MARMITEK
Advertenties
Inhoudsopgave
