Advertenties
Beschikbare talen
Beschikbare talen
en
Starting the service programme
The appliance must be ready for use.
● Empty and replace the trays 17 and 18.
● Press and hold the buttons 4
for at least 5 seconds.
S
The
LED starts to flash and the appliance
rinses the coffee dispenser through twice.
● Empty and reinsert the grounds tray 17.
The LEDs for button
light up.
● Place one cleaning tablet in the duct 13.
● Fill the water tank with lukewarm water,
add descaling agent and dissolve com
pletely (total liquid 0,5 litres)
or
pour prepared descaling mixture into the
water tank (total liquid 0,5 litres).
● Press the steam button
process begins. Duration approx. 10 min
utes. The descaling solution flows into the
water tray 18.
J
The
LED lights up.
● Place a suitable container (approx.
0,5 litres) under the nozzle 8.
● Set the dial 6 to
process begins. Duration approx. 5 min
utes. The descaling solution flows into the
container.
I
The
LED lights up.
● Empty and reinsert the grounds tray 17.
The steam button LED
● Empty and clean the water tank 11, fill
with fresh water up to the "max" mark and
reinsert.
● Place a suitable container (approx.
0,5 litres) under the nozzle 8.
● Press the steam button
ing process begins. Water flows into the
container.
F
and 5
h
H
and
"Add water"
h
. The descaling
g
h
/
. The descaling
h
lights up.
h
. The clean
J
The
LED flashes.
● Turn the dial 6 to "O". The cleaning proc
ess begins. Duration approx. 10 minutes.
h
Liquid flows into the coffee grounds tray
17 inside the appliance, then out through
the coffee outlet.
I
The
LED lights up.
● Empty, clean and reinsert the trays 17
and 18.
The appliance starts to heat up and is
ready for use once the LEDs for dispensing
E
buttons 3
Important: If the service programme is
interrupted, e.g. due to a power cut, it is
vital that the appliance be rinsed before it is
used again.
The appliance must be ready for use.
â
The
and steam button
● Rinse the water tank 11 thoroughly and fill
with fresh water.
● Press the steam button
is rinsed and liquid flows into the tray.
J
The
LED lights up.
● Hold a cup under the nozzle 8 and turn
the dial 6 to
cup.
J
The
LED flashes.
● Turn the dial 6 back to "O".
The appliance rinses and is ready for use
again.
F
and 4
light up.
h
LEDs flash.
h
. The appliance
g
h
/
. Water runs into the
19
TCA53 03/2012
Advertenties
