Advertenties
Beschikbare talen
Beschikbare talen
16
Using coffee beans
This fully automatic espresso / coffee
machine grinds beans freshly for each
brew. If possible, use only beans for fully
automatic coffee and espresso machines.
Deepfreeze or store in a cool place in
sealed, airtight containers. Coffee beans
can be ground while frozen.
Important: Fill the water tank with fresh
water every day. The tank must always
contain sufficient water for operating the
appliance. Do not allow it to become empty.
Tip: Prewarm cups, especially small, thick
espresso cups, by placing on the cup shelf
14 or rinsing with hot water.
The appliance must be ready for use.
● Place the prewarmed cup(s) under the
coffee outlet 9.
● Depending on the amount of coffee
required, press either dispensing button
E
F
3
or 4
. The coffee is brewed and
then dispensed into the cup(s).
● The appliance automatically stops
dispensing the coffee as soon as the set
quantity has been reached.
i
¡
The brewing process can be terminated
at any time by pressing the coffee
d ispensing button 3
Extra coffee
It is possible to dispense the same amount
of coffee a second time.
● Press the dispensing button 3
once again within 3 seconds of brewing.
Note: The second cup is brewed using the
previously ground coffee.
Robert Bosch Hausgeräte GmbH
E
F
or 4
.
E
F
or 4
Changing volume
dispensed
The preset quantities for dispensing button
E
3
(approx. 40ml) and dispensing button
F
4
(approx. 125 ml) can be changed.
● Press and hold the coffee dispensing
E
button 3
or 4
volume of coffee has been delivered
(range approx. 30 – 220 ml).
i
¡
The quantity can be changed again at
any time. By pressing "Reset", the factory
settings are restored.
Reset: The appliance must be ready for
use.
● Pull out trays 17 and 18. Press and hold
dispensing buttons 3
same time for at least 5 seconds.
● The LEDs 7a, b, c and d (
flash briefly as confirmation.
● Reinsert trays 17 and 18.
The standard factory settings have now
been reactivated.
Preparing hot water
The appliance must be ready for use.
This function allows water to be heated for
a cup of tea, for example.
¡
¡
Risk of burns
The nozzle gets very hot. Do not touch the
metal parts.
● Place an appropriate cup under the
nozzle 8.
● Push the sleeve on the nozzle 8 all the
way down.
● Turn the dial 6 to
¡
¡
Risk of scalding
When the dial is set to
may sputter a little. Do not touch the nozzle
8 or point it at anyone.
● End the process by turning the dial 6
back to "O".
F
until the desired
E
F
and 4
at the
H
I
S
,
,
g
h
/
.
g
h
/
, the nozzle
en
J
,
)
Advertenties
