Download Inhoudsopgave Inhoud Print deze pagina

The Washing And Drying Results Are Not Satisfactory - ZANKER KDV10030FA Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Problem and alarm code
The anti-flood device is on.
The end indicator flashes 3 times intermit-
tently.
Acoustic signal sounds 3 times intermittently.
The appliance stops and starts more times during
operation.
The program lasts too long.
Small leak from the appliance door.
The appliance door is difficult to close.
Rattling/knocking sounds from inside the appli-
ance.
The appliance trips the circuit-beaker.
Refer to "Before first use", "Daily
use", or "Hints and tips" for other
possible causes.
Once you have checked the appliance, deactivate and
activate the appliance. If the problem occurs again,
contact an Authorised Service Centre.

The washing and drying results are not satisfactory

Problem
Poor washing results.
28
All manuals and user guides at all-guides.com
Refer to "Daily use", "Hints and tips" and basket loading leaflet.
Use more intensive washing programmes.
Clean spray arm jets and filter. Refer to "Care and Cleaning".
Possible cause and solution
Close the water tap and contact an Authorised Service Cen-
tre.
It is normal. It provides optimal cleaning results and energy
savings.
If the delayed start option is set, cancel the delay setting or
wait for the end of the countdown.
The appliance is not levelled. Loosen or tighten the adjusta-
ble feet (if applicable).
The appliance door is not centred on the tub. Adjust the rear
foot (if applicable).
The appliance is not levelled. Loosen or tighten the adjusta-
ble feet (if applicable).
Parts of the tableware are protruding from the baskets.
The tableware is not properly arranged in the baskets. Refer
to basket loading leaflet.
Make sure that the spray arms can rotate freely.
The amperage is insufficient to supply simultaneously all the
appliances in use. Check the socket amperage and the ca-
pacity of the meter or turn off one of the appliances in use.
Internal electrical fault of the appliance. Contact an Author-
ised Service Centre.
For alarm codes not described in the table, contact an
Authorised Service Centre.
Possible cause and solution

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave