Adding multi-tablets
•
Adjust the water softener to the lowest level.
Setting and starting a programme
The AUTO OFF function
This function decreases energy consumption by
deactivating automatically the appliance when it is not
operating.
The function comes into operation:
•
5 minutes after the completion of the programme.
•
After 5 minutes if the programme has not started.
Starting a programme
1. Open the appliance door and keep it ajar.
2. Press on/off to activate the appliance. Make sure
the appliance is in the programme selection mode.
3. Select a programme from the control panel by
pushing a desired programme button.
A related programme indicator is on.
4. Close the appliance door to start the programme.
The appliance starts working.
Starting programme with Delay option
Make sure the appliance is on and in the programme
selection mode.
1. Select a programme from the control panel.
A related programme indicator is on.
2. Press the button
The indicator
is on.
24
All manuals and user guides at all-guides.com
1
2
1
2
to delay the programme start.
3. Continue pressing
6 or 9 hours).
A related indicator on the control panel indicates the
countdown time.
4. Close the appliance door to start the countdown.
The programme starts automatically when the
countdown is complete.
How to activate XtraDry
Press and hold simultaneously
indicator
comes on.
If the option is not applicable to the program, the related
indicator does not come on or it flashes quickly for a few
seconds and then goes off.
Opening the door while the appliance operates
Opening the door while a programme is running stops
the appliance. It may affect the energy consumption and
the programme duration. After closing the door, the
appliance continues from the point of interruption.
If the door is opened during the drying
phase, before AirDry automatically
opens it, the programme ends after 30
seconds.
to extend the countdown (3,
and
until the