Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Electrical connection
Before plugging in, ensure that the voltage
and frequency shown on the rating plate
correspond to your domestic power supply.
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power sup-
ply socket is not earthed, connect the appli-
ance to a separate earth in compliance with
current regulations, consulting a qualified
electrician.
The manufacturer declines all responsibility
if the above safety precautions are not ob-
served.
This appliance complies with the E.E.C. Di-
rectives.
Removing the shelf holders
Your appliance is equipped with shelf re-
tainers that make it possible to secure the
shelves during transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction
of the arrow (A).
2. Raise the shelf from the rear and push
it forward until it is freed (B).
3. Remove the retainers (C).
Ventilation requirements
The airflow behind the appliance must be
sufficient.
All manuals and user guides at all-guides.com
Installing the appliance
Do the following steps:
1. Apply the adhesive sealing strip to the
min.
200 cm
2
Caution! Make sure that the mains
cable can move freely.
appliance as shown in figure.
electrolux 21
min.
200 cm
2
Advertenties
Hoofdstukken
Inhoudsopgave
