b) Sound-to-light mode
• Select sound-to-light operation (display So01-So30) with the button MODE.
• Select the desired sound-to-light programme So01-So30 with the buttons UP or DOWN.
• Push the button SET UP (for So21-So30 only).
• Select the strobe setting (display SP01-SP99) for sound-to-light operation with the buttons UP or DOWN.
c) Automatic operation
• Select automatic mode again (display AU01 - AU16) with the button MODE.
• Select the desired automatic programme (AU01-AU16) with the UP and DOWN buttons.
• Push the button SET UP.
• Use the buttons UP or DOWN to select the desired speed for the programme run or the strobe effect
(display SP01-SP99).
d) FADE mode
• Select FADE mode (display FA01-FA15) with the button MODE.
• Select the desired FADE mode (FA01-FA15) with the UP and DOWN buttons.
• Push the button SET UP.
• Use the buttons UP or DOWN to select the desired speed for the colour change/programme sequence
(display SP01-SP99).
e) Operation with manual colour settings
• Select COLOR mode (display Co01-Co15) with the button MODE.
• Select the desired colour (Co01-Co15 / see table 1) with the UP and DOWN buttons.
• Push the button SET UP.
• Select the desired strobe setting (display FS00-FS15) with the UP or DOWN buttons. The strobe effect is
off for setting FS00.
f) Brightness settings (RGB W/A)
• Select the brightness setting (display r000-r255) with the button MODE.
• Use the button SETUP to select the colour to be set red (r), green (g), blue (b) or amber (A).
• Set the intensity of the brightness for the colour with the buttons UP or DOWN.
If all brightness settings have roughly the same value, the three LEDs light up white. For setting
000, the single colour is switched off.
• Use the button SET UP to select the strobe setting (display FS00-FS15).
• Select the buttons UP or DOWN to select the desired strobe setting (FS00-FS15). The strobe effect is off
for setting FS00.
All manuals and user guides at all-guides.com
33