Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
DO7074S
WWW.DOMO-ELEKTRO.BE
3. First sort laundry according to ironing temperature setting guide wool with wool,
cotton with cotton, etc.
4. The iron heats up more quickly than it cools down. Therefore, start ironing articles
that need to be ironed at the lowest temperature, such as those made of synthetic
fibres.
5. If the fabric consists of various kinds of fibres, always select the temperature
required by the most delicate fibres, i.e. the lowest temperature. for example, an
article consists of 60% polyester and 40% cotton, it should be ironed for polyester and
without steam.
6. If you do not know what kind of fabric the article is made of, iron a piece of the
material which is not visible when you wear to find out the appropriate temperature
for your articles.
7. Pure woolen fabrics (100% wool) should be ironed with the iron setting to steam
ironing position. It is advisable to set the temperature control button to "Max" position
and use a dry pressing cloth.
8. When steam ironing woolen fabrics, shiny patches may occur. You may prevent this
by turning the article inside out and ironing the reverse side.
9. After using of steam ironing for cotton fabrics, do not iron articles required by low-
er temperature (such as nylon etc.) immediately. It is advisable to adjust the tempera-
ture button to the lower setting, waiting for about 2-6 minutes till the power indicator
light turn off, and then you can start ironing.
IMPORTANT HINTS
Do not fill water tank with vinegar, perfume starch, chemically descaled water or des-
caling agents.
PREPARE THE APPLIANCE FOR USE
1. Check if the voltage indicated in the rating plate corresponding to the main voltage
in your home.
2. Remove the protective foil or sticker or card from the soleplate.
3. Fully unwind and straighten the power cord and the supply hose.
4. Place the appliance on a stable, level and horizontal surface such as ironing board.
5. Place the iron onto the iron rest plate horizontally at the base unit.
FILL WATER TANK
1. Press upwards the release button at the water tank and slide the detachable water
tank outwards from the base.
2. Fill the water tank up to or below the "MAX" fill line with the clean tap water. (You
can take filter out of the opening for filling water into water tank, or fill water into
water tank directly with the filter existing in the opening.
3. Replace the water tank into the base unit again. It will be locked in place with the
base unit until a "click" sound is provided.
4. Always pour out the remaining water after use.
34
Advertenties
Inhoudsopgave
