Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
en Troubleshooting
Fault
Automatic Super freezing
does not switch on.
HomeConnect is not work-
ing correctly.
The base of the refrigerator
compartment is wet.
Information on display panel
Fault
or appears in the tem-
perature display.
The temperature display
(freezer compartment)
flashes.
The temperature display
(freezer compartment)
flashes, a warning signal
sounds and
lights up.
32
Cause
Not a fault. The appliance
decides independently
whether automatic Super
freezing is required, and
switches it on or off automat-
ically.
Different causes are pos-
sible.
The condensation channel
or drainage hole are
blocked.
Cause
The electronics have detec-
ted a fault.
The temperature in the
freezer compartment was
too warm.
Different causes are pos-
sible.
The appliance door is open.
The ventilation openings are
covered up.
Larger quantities of fresh
food have been put in.
troubleshooting
No action required.
Go to www.home-connect.com.
▶
"Clean the condensation channel
▶
and the drainage hole." → Page 30
troubleshooting
Call the after-sales service.
▶
→ "Customer Service", Page 36
Press
.
1.
a The temperature display (freezer
compartment) briefly indicates the
warmest temperature reached in
the freezer compartment. The tem-
perature display (freezer compart-
ment) then indicates the set tem-
perature again.
Press
.
2.
a The temperature display (freezer
compartment) no longer flashes.
Press
.
▶
a The alarm is switched off.
Close the appliance door.
▶
Remove any obstructions from in
▶
front of the ventilation openings.
Do not exceed the max. freezing ca-
▶
pacity.
→ "Freezing capacity", Page 26
Advertenties
Hoofdstukken
Inhoudsopgave
