Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Power selection zone "SLIDER" and timer setting zone
Select the cooking zone. The display corresponding to the selected zone will be highlighted.
While the zone is activated (for a few seconds), you can adjust the power, either by sliding your
finger on the slider, or by direct access.
To adjust the power of another cooking zone, wait until the previous zone is no longer activated
(the highlighted display becomes normal).
Power selection zone "SLIDER" and timer setting zone
Starting-up
Start up / switch off the hob:
Action
To start
To stop
Start up / switch off a heating zone:
Action
Zone selection
To set
(adjust the power)
To stop
If no action is made within 20 second the electronics returns in waiting position.
Pan detection
The pan detection ensures a perfect safety. The induction doesn't work:
If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level set before.
After use, switch the heat element off: don't let the pan detection [ U ] active.
Residual heat indication
After swittching off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on, don't touch the heating zones and don't put any heat
sensitive object on them. There are risks of burn and fire.
All manuals and user guides at all-guides.com
"SLIDER
"
Control panel
Press key [ 0/I ]
Press key [ 0/I ]
Control panel
Press on the "SLIDER"
across from the desired zone
Slide on the "SLIDER"
to the right or to the left
Slide to [ 0 ] on "SLIDER"
or press on [ 0 ]
54
Direct access
Display
[ 0 ] are blinking
Nothing or [ H ]
Display
[ 0 ] and control
light on
[ 0 ] to [ 9 ]
[ 0 ] or [ H ]
[ 0 ] or [ H ]
Advertenties
Hoofdstukken
Inhoudsopgave
