Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Power on the System / Schalten Sie das System ein / Mise sous tension du système
/ Encienda el sistema / Ligue o sistema / Het systeem inschakelen / Accensione del
sistema / Włączanie systemu / Zapnutí systému / Slå på systemet / Pornire sistem
/ Включване на системата / Tænd for systemet / Ρεύμα στο σύστημα / Süsteemi
sisselülitamine / Kytke järjestelmän virta päälle / Napajanje sustava / Rendszer áram
alá helyezése / Įjungti sistemą / Ieslēdziet sistēmu / Zapnite system / Vklopite sistem /
Sistemin Gücü / Ligar o sistema
LED Indicators / LED-Indikatoren / Indicateurs LED / Indicadores LED / Indicadores LED
/ LED-indicatoren / Indicatori LED / Wskaźniki LED / LED indikátory / LED-indikatorer
/ Indicatori LED / LED индикатори / LED-indikatorer / Ενδεικτικές λυχνίες LED / LED-
indikaatorid / LED-merkkivalot / LED pokazatelji / LED kijelzők / LED indikatoriai /LED
indikatori / LED indikátory / LED kazalniki / LED Göstergeleri / Indicadores LED
Indicators on BMS
No.
Mode
1
Power off
Idle command from
2
inverter
3
BMS protection
4
Fault
5
Upgrade
6
Activation
7
Black start
1
3
2
Light off
Green LED lights on for 1 second, and then lights off for 4
seconds.
Orange LED lights on for 1 second, and then lights off for 4
seconds.
Red LED remains on for up to 10 minutes, and then flashes
for one second and turns off for 4 seconds.
The Green LED lights on for 0.3 second, and then lights off
for 0.3 second.
Green LED remains on.
After pressing and holding the POWER button for 20
seconds, the first and fourth lights will flash blue, and then
the second and third lights quickly after. The battery then
enters Black Start mode.
Step 1. Pull upward the cover
Step 2. Flip the circuit breaker switch
Step 3. Press and hold the "POWER" button
*Note: A system problem may encountered
while pressing the button frequently. The
user may need to wait at least 10 seconds
and then try again.
Description
Status
100%
75%
50%
25%
SOC
99
Advertenties
Inhoudsopgave
