Advertenties
Beschikbare talen
Beschikbare talen
Mounting the fascia doors
Ensure that there is a gap of 3 to 4mm between the non-hinged side and the cabinet
wall.
Locate the slider in the bracket and fix the slider to the fascia door 20
to 22mm from the edge of the fascia as shown in following pic., ensuring that the
slider is positioned centrally and horizontally within the bracket. Tighten securely by
hand.
Fill the gap on the non-hinged side with the gasket/seal strip provided.
The finished look for the door sliders should be similar to those shown in following
pic., which shows 2 sliders inplace.
Ensure the appliance doors open, close and seal properly.
Once complete, and if you are happy with the fit of the appliance in the cabinet, bend
and snap the parts of the white spacers marked 'S' as shown by the dotted outline.
Leave the rest of the spacer cover in place over the metal plates.
26
Advertenties
