Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
B
Product usage
All modes
+
Bluetooth/TF/USB
All modes
LED lights
1.
Press and hold the
2.
Press the
button repeatedly to select 1 of the 7 LED light displays.
Connecting two speakers (TWS)
You can connect two EDENWOOD PARTY 100 speakers to play music at the same time. The
LED lights and playback buttons can be used on either speaker to operate it in TWS mode.
1.
Make sure that both units are not connected to any other Bluetooth devices.
2.
Place the speakers within 10 metres (with no obstructions) of each other.
3.
Turn on one speaker, a sound prompt will play, and the LED lights will flash.
4.
Connect the external Bluetooth device through its Bluetooth settings to the speaker
(this will be the master speaker). Choose the pairing name of the master speaker. When
connected, a melody will play.
5.
Turn on the second speaker, a sound prompt will play, and the LED lights will flash.
6.
In Bluetooth mode, press the
speakers will play a melody to confirm they are connected in TWS mode.
7.
Press the
button on either speaker to stop using the TWS mode. A melody will play,
and your external device will now be connected to only one speaker.
NOTE:
•
You can only connect the two speakers when you are in Bluetooth mode. Once
the two speakers have been connected in TWS mode, if they are turned off and
then later turned on again, they will automatically reconnect with each other.
•
You can only connect a EDENWOOD PARTY 100 speaker with another
EDENWOOD PARTY 100 speaker. You cannot pair the EDENWOOD PARTY 100
speaker with other models or brands of speakers that have TWS capability.
•
If you want to make a TWS connection with a different speaker, remove previous
connections before attempting to connect with the new speaker.
•
If you cannot successfully connect two speakers, turn off both speakers and
start the connection process again.
Reset
•
If the speaker is not working properly, insert a thin blunt instrument, such as a tip of a pen
or paper clip end, onto the circular part of the reset hole or press it to reset the speaker.
button to turn the LED lights on or off.
button simultaneously on both of the speakers. The
11
Press to increase the volume.
NOTE: A beep sounds when you have
reached the highest volume setting.
Press and hold to skip to the next track
or file.
Press repeatedly to select default, treble
or bass sound effects.
EN
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
