Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
B
Product usage
2.
Connect the 3.5mm plug on the AUX IN cable to the speaker AUX IN port and plug the
other end into your device.
NOTE:
•
When you connect a 3.5mm plug into the AUX IN port, a melody will play and
then the speaker will automatically enter AUX IN mode.
•
You can adjust the volume on the speaker or mute it. For all other playback
options, use the external device's controls.
•
You can also use the AUX IN port to connect headphones.
TransFlash (TF) card and USB memory stick
•
Press and hold the
•
Insert a TransFlash or Micro SD card into the TF card slot until it clicks into place or insert
the USB memory stick into the USB slot.
NOTE:
•
When you connect a TransFlash card or USB memory stick, a melody will play
and then the speaker will automatically enter TF or USB mode.
•
For best playback, make sure only compatible MP3 audio files are stored on
the TransFlash card or USB memory stick.
•
To remove the TransFlash card, simply press the card further into the slot and then release
it. The card will pop out of the slot.
•
To remove the USB memory stick, simply pull it out of the USB slot.
Pairing a Bluetooth device
To connect this speaker to a Bluetooth device, you must first pair the speaker with the device.
1.
Turn on the Bluetooth device (such as your phone or tablet):
• Go to settings on your device.
• Select Bluetooth and turn it on.
NOTE: If your Bluetooth device was previously connected to another device, remove
that connection.
2.
Press and hold the
will enter the Bluetooth mode (default mode). (If the speaker is already on, press the
button to enter Bluetooth mode directly.) The speaker will automatically start searching
for a new or existing Bluetooth device. While the speaker is searching for the Bluetooth
device, the white Bluetooth indicator light will flash quickly.
3.
When the Bluetooth device displays the speaker's Bluetooth name, EDENWOOD PARTY 100,
select the name and confirm the connection. A melody will play, and the white Bluetooth
indicator light will become constant to confirm the devices have successfully paired.
button to turn on the speaker.
button to turn on the speaker. A melody will play, and the speaker
9
EN
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
