Download Inhoudsopgave Inhoud Print deze pagina

Safe And Correct Use Of The Oven During Pyrolytic Cleaning - ETNA OP316MZ/E04 Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

WARNING: The appliance and some of its accessible parts
may become very hot during use. Care should be taken to avoid
touching heating elements. Children less than 8 years of age
shall be kept away unless continuously supervised.
The appliance is not intended to be controlled by external timers
or separate remote controll system.
Only use the temperature probe recommended for use in this
oven.
Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the oven door glass/ the glass of hinged lids of the hob
(as appropriate), since they can scratch the surface, which may
result in shattering of the glass.
Do not use steam cleaners or high-pressure cleaners to clean
the appliance as this may result in an electric shock.
WARNING: Before replacing the light bulb, make sure the
appliance has been disconnected from the mains power, in
order to prevent the hazard of an electric shock.
Never pour water directly on the bottom of the oven cavity.
Temperature differences could result in damage to the enamel
coating.

Safe and correct use of the oven during pyrolytic cleaning

Before pyrolytic cleaning, the appliance must be suitably
prepared (see chapter "Automatic oven cleaning - pyrolysis").
Before you start the cleaning process, remove any residue of
spilt liquid and all moving parts from the oven cavity.
5

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Op316mz/e05Op316mz

Inhoudsopgave