Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1.3 Install the body
1). Move the machine with installed heat pipe and fittings before the win-
dow, and the distance between the body and walls or other objects shall be
least 50 cm (as shown in Figure 4).
2). Elongate the heat pipe and snap the flat end of the heat pipe joints into
the elliptical hole of the window sealing plate assembly (as shown in Figure
5 and Figure 6) .
Notes: 1. the flat end of the heat pipe joints must be snapped into place.
2. The pipe cannot be distorted nor has substantial turning
(greater than 45 °). Keep the ventilation of the heat pipe unobstructed.
2 8
Advertenties
Hoofdstukken
Inhoudsopgave
