Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Assembly/disassembly
Install the four castors
lation wrench
as shown in Figure D.
6
Remark: There are 8 plain washers installed,
to protect the product inside the packaging. To
install the swivel castors
dispose the plane washers first.
Draw the handle holder upwards into a vertical
position (see Figure B).
Loosen the handle by pressing the metal frame
downwards, and pull out the handle until it au-
dibly locks into place (see Figure C).
Raise the securing clamp and turn it approx.
90 ° in a clockwise direction until it is resting
on the black cross brace (see Figures D1‒D3).
Now pull the loading platform apart until the
two black cross braces meet.
Turn the securing clamp a further 90 ° so that
it covers both black cross braces, then press it
downwards until it locks into place.
The transport trolley can be stabilised with the
help of the brakes on both swivel castors
To do this, press the locking lever (see Figure
D4) on the castors
To fold up the transport trolley again, repeat
the steps described above in reverse.
To slide the handle into the handle holder and
then fold up the handle holder, you must press
the metal frame (see Figure C) downwards.
Cleaning and care
Use a damp, lint-free cloth to clean the product.
Maintenance
Check all the connection points on the transport
trolley regularly. If you detect any damages,
do not use the transport trolley.
6
GB/IE/NI
,
using the instal-
1
2
, please remove and
2
2
downwards.
2
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
Warranty
Warranty claim procedure
To ensure quick processing of your case, please
observe the following instructions:
Please have the till receipt and the item number
(IAN 380535_2110) available as proof of pur-
chase.
You will find the item number on the rating plate,
an engraving on the front page of the instructions
.
for use (bottom left), or as a sticker on the rear or
bottom of the product.
If functional or other defects occur, please contact
the service department listed either by telephone or
by e-mail.
You can return a defective product to us free of
charge to the service address that will be provided
to you. Ensure that you enclose the proof of pur-
chase (till receipt) and information about what the
defect is and when it occurred.
Service
Service Great Britain
Tel.:
08000569216
E-Mail: owim@lidl.co.uk
Service Ireland
Tel.:
1800 200736
E-Mail: owim@lidl.ie
Service Northern Ireland
Tel.:
0800927852
E-Mail: owim@lidl.ie
Advertenties
Inhoudsopgave
