Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5.2.
Cleaning the housing
1.
Press the on/off switch to switch off the device.
2.
Remove the mains plug from the socket.
3.
Use a soft damp cloth to wipe the housing.
4.
Then wipe the appliance dry with a soft cloth.
5.3.
Thorough cleaning
Depending on the degree of use and the operating environment, dust and other dirt
may have ended up in the air inlet and outlet. In this case, more thorough cleaning is
required.
1.
Press the on/off switch to switch off the device.
2.
Remove the mains plug from the socket.
3.
Loosen the screw from the guard with a screwdriver.
4.
Detach the guard clip from the rear guard and remove the front guard.
5.
Hold the fan blade and loosen the blade nut clockwise from the fan motor shaft.
6.
Remove the blade nut and fan blade from the fan shaft.
7.
Use a soft damp cloth to wipe the fan blade and guards.
8.
Then wipe the fan blade and guards dry with a soft cloth.
9.
Follow the steps in the 3.3.Installing the appliance section to reassemble the
appliance.
1 1
5.4.
Replacing the battery in the remote control
NOTICE!
• Risk of damage to the appliance. When installing the batteries, pay attention to
the correct polarity. The orientation of the positive (+) and negative (−) terminals
of the battery must correspond to the + and − on the battery compartment.
• Risk of damage to the appliance. Only use AAA batteries in the remote control.
Do not use any other batteries.
56
FUAVE SF120DCPB | SF120DCPW
Advertenties
Hoofdstukken
Inhoudsopgave
