Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION
Installation
EBK 5 K
12 + x
22 + x
2
105 + x
KBA 5 KA
12 + x
22 + x
2
105 + x
1 Wall mounting bracket
2 Height specification
x Increase of tap insertion depth / distance of tabs from the
wall mounting bracket: maximum 15 mm.
Note
If the tap insertion depth is greater than
105 mm, adapt the bend in the tabs of the wall mounting
bracket (see illustration).
f Fit the wall mounting bracket using the rawl plugs, washers
f
and screws supplied.
f Align the wall mounting bracket using a spirit level. Take
f
care to observe the height specification. If the wall is uneven,
the wall mounting bracket can be secured using additional
screws at the bottom.
www.stiebel-eltron.com
1
1
EBK 5 K
1 Compression fitting, spanner size 19
2 Overflow/steam pipe
KBA 5 KA
1 Compression fitting, spanner size 19
2 Overflow/steam pipe
f Slide the appliance from above down onto the wall mounting
f
bracket and the tap fitting so it is properly aligned.
f When fastening the compression fitting, apply slight down-
f
ward pressure on the appliance.
f Attach the overflow/steam pipe.
f
1
2
1
2
EBK | KBA |
21
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
