STEP 08
/ To extend the rotisserie poles, first press and release them so the first section pops out
from the barbeque. Pull the poles up and rotate clockwise to allocate the poles in one of
the 3 height settings. The pole to the right contains the rotisserie motor.
STEP 09
/ Take the rotisserie rod with the food attached and place the pointed end in the motor
hole at the top of the right hand side pole. Lever the handle side of the rod down into
the slot of the left hand and close the pole cover.
Assembly, Operation & Maintenance Instructions
STEP 10
/ With the barbeque in a secure position, fully extend the power cord from the recess on
the right hand side (do not over-extend) and connect to your power supply.
*Due to ongoing design modifications, support brackets may be permanently fixed to the element
MAINTENANCE
It is recommended that at the commencement of each barbeque season the following
maintenance be conducted:
BARBEQUE
1. Wipe over the outer areas of the barbeque with a clean cloth.
2. Check all oils and ash have been cleaned from the charcoal chamber and under the
element.
3. Check all fasteners for tightness and re-tighten where necessary to ensure rigidity of
the structure.
4. Check retractable power cord is operational and the cord/plug is undamaged.
Wear and tear to this barbeque can be reduced by covering and storing out of the
weather when not in use.
15