Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the func-
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.
Observe the safety informa-
tion and notes on charging
and proper use as shown in
the instruction manual for
your battery and charger
from the Parkside X 12 V
Team series. A detailed de-
scription of the charging pro-
cess and further information
can be found in the separate
operating instructions.
Operating
Wear suitable clothing and
work gloves when working
with the equipment.
Wear eye and ear protection.
Ensure that the equipment is
functional before each use. The
On/Off switch and the safety
switch must not be held closed.
They must switch off the motor
when on is released. Should
a switch be damaged, stop
working with the equipment.
Ensure that the mains voltage
value matches the label on the
equipment. Reduce the risk of
injuries and accidents by wear-
ing personal protection equip-
ment and ensuring that the
unit is fully functional.
Note noise protection and local
specifications.
Switching On and Off
Ensure that you are standing in a
firm position with both hands grip-
ping the hedge trimmer away from
the body. Ensure that the trimmer
is in contact with no other objects
before switching on.
Removing the blade guard:
1. Pull the blade guard (10) off the safety
cutter bar (1).
Turning on:
2. Check that the battery (9) is in (Observe
the separate operating instructions for
the rechargeable battery and charger).
3. Press the safety switch (3) at the front
handle (4).
4. Press the On/Off switch (8). The hedge
trimmer will run at top speed.
Turning off:
5. Release the safety switch (3) or the
On/Off switch s (8).
Checking the battery charge
level
The battery charge indicator (
ises the state of charge of the battery (
while the device is operating.
3 LEDs are on (red-yellow-green):
Battery charged
2 LEDs are on (red-yellow):
Battery partially charged
1 LED is on (red):
Battery needs to be charged
Only charge the battery (
when the red LED on the charge
level indicator is on.
GB
IE
NI
6) signal-
9)
9)
11
Advertenties
Hoofdstukken
Inhoudsopgave
