Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Do not use Meter around explosive gas or vapor.
To reduce the risk of fire or electric shock do not
expose this product to rain or moisture.
Probe assemblies to be used for mains
measurements shall be rated as appropriate
for measurement category III or IV according
to EN 61010-031 and shall have a voltage rating
of at least the voltage of the circuit to be
measured.
Caution:
Disconnect the test leads from the test points
before changing the position of the function
rotary switch.
Never connect a source of voltage with the
function rotary switch in Ω, % position.
Do not expose Meter to extremes in temperature
or high humidity.
Never set the meter in Ω, %, function to measure
the voltage of a power supply circuit in equip-
ment that could result in damage the meter and
the equipment under test.
Symbols as marked on the Meter and Instruction manual:
Risk of electric shock
See instruction card
DC measurement
AC measurement
Equipment protected by double or reinforced
insulation
Battery
Earth
Conform EU directives
Do not discard this product or throw away
Unsafe voltage
To alert you to the presence of a potentially hazardous
voltage, when the Tester detects a voltage >30 V or a voltage
overload (OL) in V . The symbol is displayed.
47
www.nieaf-smitt.com
Advertenties
Hoofdstukken
Inhoudsopgave
