Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
5. INSTALLATION
ALWAYS USE THE MAIN SWITCH TO ISOLATE THE POWER SUPPLY
01
Remove the valve cover plate before installing the device.
03
Fix the height adjusters to the casing. Do not completely tighten
the bolt.
05
Break the metal strip on the short end of the casing ( to enable
continuous installation of the grille).
Only on the ends that need to be connected .
42
THROUGH-MOUNTING
02
Mount the sound decoupler around each height adjuster .
04
Un screw the control screws in the bottom of the unit and place
the plastic caps on the bottom of the screws to prevent vibrations
and noise to the floor.
06
THROUGH-MOUNTING
Make sure that the units are positioned correctly and that the
casings fit tightly. Use the supplied connecting pieces to connect
the different units.
Advertenties
Hoofdstukken
Inhoudsopgave
