Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Always disconnect the charging station from its power supply completely
and read the manual before performing any maintenance or fixing any
malfunctions.
Repairs or replacements of components may only be done if using
products that are approved by the supplier. When in doubt, please contact
Ecotap® first.
Repairs and replacements must always be performed by an authorised person / specialist.
The maintenance must always comply with and be performed in compliance with NEN3140
and NEN50110 low voltage EU directives.
Check the charging station for any leaks.
Test the heating element and the thermostat together to make sure they are working
correctly. The thermostat must be set to five degrees or to frost protection mode. Check the
connections on the power supply cable and ensure a fixed connection of between 4 and 5
Nm.
Treat any minor damage to the charging station with corrosion-resistant paint in the right
shades (Ecotap® green ral.6018 & white ral.9016).
Treat the cylinder locks with graphite powder or a suitable oil product if they require any
maintenance.
21. TRANSPORTATION AND STORAGE
Store the charging station (the core housing all of the technology) upright and prevent the
coating from being damaged; any such damage might result in corrosion. Provided that they
are properly protected to prevent them being damaged, the caps can be transported in a
variety of positions. The charging station should be stored in a dry, damp-free area.
22. IN CASE OF MALFUNCTIONS
In case the DUO Wide charging station is not functioning (properly), please contact the
Ecotap® 24/7 helpdesk immediately (phone number: 0031 (0) 411-745020) or a licensed
mechanic in possession of measuring and testing equipment with auto simulation.
WARNING!
All work performed on and modifications made to the charging station must comply with
NEN1010 at the very least.
23. OPERATION AND USE OF CHARGING STATION
28. www.ecotap.nl
30-03-23
Advertenties
Hoofdstukken
Inhoudsopgave
