Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
FAN speed
When the device is powered on, it automatically starts at medium speed, and after 3
seconds it automatically switches to low speed.
B
Repeatedly press the fan Speed button on the device
or remote control
until the
4
required FAN speed has been selected. There are 3 selectable FAN speeds; low, medium
& high speed.
While pressing, a beep sounds and the selected FAN speed is indicated on the control
panel.
FAN airflow
The device has 3 selectable mode functions: normal – natural - sleep.
F
Press the mode button on the device
or remote control
to select the desired mode.
6
• Normal = regular fixed FAN speed (speed is selectable: low – medium – high)
• Natural wind = varying FAN speeds, giving a natural wind breeze with some high-speed
breezes.
• Sleeping wind = varying gentle FAN speeds, giving a natural wind breeze between low
and medium speed.
While pressing, a beep sounds and the selected airflow LED indicator lights up on the
control panel.
Swing mode
To control the horizontal direction (up/down) of the airflow, adjust the louver in the air outlet
by hand.
2
To control the vertical (left/right) direction of the airflow, press the Swing button on the
D
device
or remote control
. While pressing, a beep sounds and the swing LED indicator
3
lights up on the control panel.
Cooling mode
C
Press the Cool button on the device
or remote control
. While pressing, a beep
5
sounds and the LED indicator lights up on the control panel.
When using the device in cooling mode, the water tank needs to be filled with cold
water!
To achieve a longer cooling function, fill the ice packs with water and freeze them before
use.
Filling the water tank:
• Switch off the device and disconnect it from the mains electricity supply.
• Turn the lock
9
counter clockwise, making it possible to slide the water tank
8
out of the
device.
• Add clean fresh water in the water tank (max 7L).
5
• Place the frozen ice packs
for extended cooling
performance.
• Respect the MIN & MAX water levels. There is an indicator
at the front of the device
10
& in the water tank itself
• Slide the water tank back in the device and secure it by
9
turning the lock
clockwise, so it cannot be opened.
• Do not move the device while operating, to avoid water
spilling.
EN 07
Advertenties
Inhoudsopgave
