Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CONTROL PANEL:
Power ON/OFF button
1
Timer button
2
Swing mode button
3
Remote control
The remote control has a pre-installed lithium CR2025 battery.
Remove the protective tab to activate the remote control battery.
Inserting / replacing the remote control battery:
1) Push the security lock.
2) Pull out the battery tray and remove the old battery.
3) Place a new CR2025 battery into the battery tray with correct polarity (+/-) as indicated.
4) Place battery tray back in the slot.
A
B
C
Modes
Power ON/OFF
Connect the device to an easily accessible power socket. When connected, the power LED
indicator on the control panel lights up and a beep sounds.
Press the power ON/OFF button on the device
device. While pressing, a beep sounds.
When the device is powered on, it starts at medium FAN speed, after 3 seconds it changes
to low speed.
When switching on the device it automatically starts in Normal mode.
To switch off the device, press the power ON/OFF button on the device
A
control
again. A beep sounds. The power LED stays illuminated on the control panel.
FAN mode
You can ventilate your room. In this mode the air is circulated, creating a 'breeze feeling',
but the room will not be cooled.
Press the FAN button on the device
on the control panel.
You can select the required FAN speed as described in "FAN speed"
FAN Speed button (low-medium-high)
4
Cool button
5
FAN button (normal-natural-sleep)
6
D
E
REMOTE CONTROL:
F
A
Power ON/OFF
B
FAN speed
C
Cool mode
Swing mode
D
Timer
E
FAN selection
F
or remote control
6
EN 06
or remote control
1
F
until the LED indicator lights up
A
to switch on the
or remote
1
Advertenties
Inhoudsopgave
