Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Set the function switch to the 'Ω cap' position
1.
Use the Mode button to select the continuity measurement
2.
Insert the black test lead into the COM terminal and the
3.
lead into the terminal
4.
Connect the test probe tips across the circuit or component under
test
5.
If the resistance is at less than 50
4.6
Capacitance
Warning:
To avoid electric shock, discharge the capacitor under test
before measuring.
Set the function switch to the 'Ω cap' position.
1.
Use the Mode button to select the CAP measurements
2.
Insert the black test lead into the COM terminal and the
3.
lead into the terminal
4.
Connect the test probe tips across the circuit or component under
test
5.
Read the value on the LCD display
6.
The display will indicate the proper decimal point and value
For high capacitance values the measurement can take several
minutes before the final reading stabilizes
, a tone will sound
Ω
www.nieaf-smitt.com
red
test
red
test
23
Advertenties
Hoofdstukken
Inhoudsopgave
