1
Safety
The instruction manual contains information and
references, necessary for safe operation and maintenance
of the tester. Prior to using the tester (commissioning/
assembly) the user is kindly requested to thoroughly
read the instruction manual and comply with it in all
sections.
Failure to read the tester manual or to comply with the
warnings and references contained herein can result in
serious bodily injury or tester damage.
The respective accident prevention regulations established by the
professional associations are to be strictly enforced at all times.
2
Symbols
International Safety Symbols
This symbol, adjacent to a terminal, indicates that,
under normal use, hazardous voltages may be
present
This symbol, adjacent to another symbol or termi-
nal, indicates the user must refer to the manual for
further information.
Double insulation
Safety notes
Do not exceed the maximum allowable input range of
any function.
Do not apply voltage to meter when resistance function
is selected.
Set the function switch OFF when the meter is not in use.
Remove the battery if meter is to be stored for longer
than 60 days.
Warning
Set function switch to the appropriate position before
measuring.
When measuring volts do not switch to current/
resistance modes.
Do not measure current on a circuit whose voltage
exceeds 1000 V.
16
www.nieaf-smitt.com