Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
When changing ranges always disconnect the test leads
from the circuit under test.
Replace the batteries as soon as the low battery
indicator appears.
Cautions
Improper use of this meter can cause damage, shock,
injury or death. Read and understand this user manual
before operating the meter.
Always remove the test leads before replacing the
battery.
Inspect the condition of the test leads and the meter
itself for any damage before operating the meter. Repair
or replace any damage before use.
Use great care when making measurements if the
voltages are greater than 50 VAC rms or 120 VDC. These
voltages are considered a shock hazard.
Always discharge capacitors and remove power from the
device under test before performing Diode, Resistance or
Continuity tests.
Voltage checks on electrical outlets can be difficult and
misleading because of the uncertainty of connection to
the recessed electrical contacts. Use a 2-pole voltage
tester like the EazyVolt to ensure that the terminals are
not "live".
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment
may be impaired.
Function
AAC
VDC, VAC
VDC, VAC (low imput impedance)
Resistance, Capacitance, Diode test
Maximum input
200 AAC
1000 VAC/DC
600 VAC/DC
300 VAC/DC
www.nieaf-smitt.com
17
Advertenties
Hoofdstukken
Inhoudsopgave
