Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Note! This function is only available in NORMAL air flow mode.
Swing mode
To control the horizontal direction (up/down) of the airflow, adjust the louver in the air outlet
by hand.
2
To control the vertical (left/right) direction of the airflow, press the SWING button on the
D
device
or remote control
3
FAN airflow
The device has 3 selectable mode functions: normal – natural - sleep.
F
Press the mode button on the device
or remote control
to select the desired mode.
6
• Normal = regular fixed FAN speed (speed is selectable: low – medium – high)
• Natural wind = varying FAN speeds, giving a natural wind breeze with some high-speed
breezes. (FAN speed is not selectable)
• Sleeping wind = varying FAN speeds, giving a natural wind breeze between low and
medium speed. (FAN speed is not selectable)
Cooling mode
Press the Cool button on the device
C
or remote control
until the Cool LED indicator on
5
the control panel lights up.
Filling the water tank:
• Switch off the device and disconnect it from the mains
electricity supply.
• Add clean fresh water, max 5.5L water
• Respect the MIN & MAX water levels. There is an
indicator at the front of the device
9
& in the water tank
itself
5
• Place the frozen ice packs
for extended cooling
performance.
• Slide the water tank back in the device and secure it by
turning the lock clockwise so it cannot be opened.
• Do not move the device while operating, to avoid water
spilling.
Note!
• DO NOT OPERATE THE COOLING MODE WITHOUT
WATER IN THE WATER TANK
• ONLY USE CLEAN FRESH WATER, AND DO NOT ADD
ANY ADDITIVES!
Empty the water tank:
• Switch off the device and disconnect it from the mains
electricity supply.
• Open the water tank by turning the lock counter clockwise
and pull out the reservoir.
• Remove the plug
10
on the right bottom to drain the water
from the tank
10
• When the tank is empty, properly place back the plug
.
• Slide de water tank back in the device and secure it by turning the lock clockwise
EN 07
Advertenties
Inhoudsopgave
