Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Inserting / replacing the remote control battery:
1) Push the security lock.
2) Pull out the battery tray and remove the old battery.
3) Place a new CR2025 battery into the battery tray with correct polarity (+/-) as indicated.
4) Place battery tray back in the slot.
A
B
C
Modes
Power ON/OFF
Connect the device to an easily accessible power socket. When connected, the Power LED
indicator
on the control panel lights up and a beep will sound.
1
Press the power ON/OFF button on the device
device.
When the device is powered on, it start at medium FAN speed, after 3 seconds it will
change to low speed.
When switching on the device it will automatically start in Normal mode.
To switch off the device, press the power ON/OFF button on the device
control (A) again, until the Power LED indicator
FAN mode
You can ventilate your room. In this mode the air is circulated, creating a 'breeze feeling',
but the room will not be cooled.
Press the FAN button on the device
indicator on the control panel lights up.
You can select the required FAN speed as described in "FAN speed"
FAN speed
When the device is powered on, it will start automatically at medium speed, after 3 seconds
it will automatically switch to low speed.
Repeatedly press the fan SPEED button on the device
required FAN speed has been selected. There are 3 selectable FAN speeds; low, medium
& high speed.
While pressing the required FAN speed, the SPEED LED display
selected speed.
D
E
REMOTE CONTROL:
F
A
Power ON/OFF
B
FAN speed
C
Cool mode
D
Swing mode
Timer
E
Fan selection
F
or remote control
6
EN 06
or remote control
1
on the control panel switches off.
1
F
until the FAN – Normal LED
or remote control
4
A
to switch on the
or remote
1
B
until the
will indicate the
4
Advertenties
Inhoudsopgave
