Download Inhoudsopgave Inhoud Print deze pagina

Changing The Basic Settings; Dcleaning; Ceramic; Hob Surround - CONSTRUCTA CA626252 Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Display
Function
Only the confirmation signal is switched on.
ƒ
Confirmation signal and operation error signal switched
on.*
™ˆ
Activating the heating elements
Switched off.
Switched on.
Last setting before the hotplate was switched off.*
ƒ
Time for selecting the hotplate
™Š
Unlimited: the last selected hotplate can always be
adjusted without having to select it again.*
Once you select a hotplate, you have 10 seconds to adjust
it, after which you will have to select it again in order to be
able to adjust it.
Reset the basic settings
™‹
Switched off.*
Switched on.
*Basic setting

Changing the basic settings

The hob must be switched off.
Switch on the hob.
1.
Within the next 10 seconds, touch and hold the
2.
symbol for 4 seconds
and
flash alternately in the lower display and
lights up in the upper display.
Touch the
symbol repeatedly until the desired
3.
setting appears in the lower display.
Touch the + or - symbol repeatedly until the desired
4.
setting appears in the upper display.
Touch the
symbol for 4 seconds.
5.
The setting is activated.
Switching off
To exit the basic setting, switch off the hob with the
main switch and make new settings.

DCleaning

Suitable maintenance and cleaning products can be
C l e a n i n g
purchased from the after-sales service or in our e-Shop.

Ceramic

Clean the hob after each use. This will prevent spills
from burning onto the ceramic.
Only clean the hob when it has cooled down sufficiently.
Use only cleaning agents which are suitable for glass
ceramic. Follow the cleaning instructions on the
packaging.
Never use:
Undiluted washing-up liquid
Detergent intended for dishwashers
Scouring agents
Harsh cleaning agents such as oven spray or stain
remover
Abrasive sponges
High-pressure cleaners or steam jet cleaners
Ground-in dirt can be best removed with a glass
scraper, available from retailers. Please note the
manufacturer's instructions.
You can also obtain a suitable glass scraper from our
after-sales service or from the e-Shop.
Using special sponges to clean glass ceramic achieves
great cleaning results.

Hob surround

To prevent damage to the hob surround, observe the
following instructions:
Use only hot soapy water.
Wash new sponge cloths thoroughly before use.
Do not use any sharp or abrasive agents.
Do not use the glass scraper.

Cleaning

en
31

Advertenties

Inhoudsopgave
loading

Inhoudsopgave