Advertenties
Beschikbare talen
Beschikbare talen
8. ASSIGN SWITCHES
Any of the four music channels can be assigned to either side of the crossfader by the setting of these switches.
9. LED DISPLAYER:
The unit has two LED displays Left output, Right output the left and right output display shows the
output level of the mixer.
10. POWER:
Power switch
11. MASTER:
This controls the overall output from the mixer, master output to the PA system
12. PHONES LEVEL
This controls the output volume of the headphones. Care should be taken not to have this set to high as
it could result in damage to both the hearing of the user and the headphones. The channel to be monitored is selected via the cue
assign control Knob.
13. CUE SELECTOR
Select each channel of the CUE signal
14. HEADPHONE
1/4' jack headphone out
15. MP3 MODE
This mode can be loading or recording MP3 from the USB stick.
16. MP3 DISPLAYER
17. POWER INPUT
Please ensure the correct voltage is selected for your country. Failure to set the correct voltage will cause damage to the unit.
18. MIC 2 INPUT
1/4" Jack input.
19. CHANNEL 1
PHONO 1 INPUT/line1 JACKS
20. CHANNEL 2
PHONO 2 INPUT/line2 JACKS
21. CHANNEL 3
Line3 JACKS
22. CHANNEL 4
Line4 input/mic2 JACKS
Advertenties
