Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Electrical connection
The appliance is designed to be
connected to 230 V monophase electricity
supply.
The connection must be carried out in
compliance with the laws and regulations
in force.
Before the appliance is connected:
1) check that the main fuse and the
domestic installation can support the load
(see the rating label);
2) check that the power supply is
properly earthed in compliance with the
current rules;
3) check the socket or the double pole
switch used for the electrical connection
can be easily reached with the appliance
built in the forniture unit.
The appliance is supplied with the plug
attached. The mains cable and plug as
supplied are to be connected to a
shockproof socket (230 V~, 50 Hz). The
shockproof socket must be installed in
accordance with the regulations.
If connecting the appliance directly to
the electric system, it is necessary that you
install a double pole switch between the
appliance and the electricity supply, with a
minimum gap of 3 mm. between the switch
contacts and of a type suitable for the
required load in compliance with the
current rules.
The connection cable has to be placed
in order that, in each part, it cannot reach
a temperature 50°C higher than room
temperature.
The brown coloured phase cable (fitted
in the terminal block contact marked with
"L") must always be connected to the
network phase.
39
Advertenties
Hoofdstukken
Inhoudsopgave
