Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4.
Remove the bottom washer and the nut
that holds the pin shaft in the right hole on
the bottom hinge, then remove the shaft.
5.
Insert the pin shaft in the left hole on the
bottom hinge and secure the shaft with the
bottom washer and nut.
6.
Attach the bottom hinge to the left-hand
side of the cabinet and the adjustment leg
on the right side of the cabinet. Remove
the screw securing the door closer at the
bottom right of the door of the refrigerator
compartment, then remove the door closer
and install it at the bottom left.
7.
Install the door of the refrigerator
compartment. Move the door bush from
the top right side of the refrigerator door
to the top left side of the door. Move the
cover plate from the left hole to the right.
8.
Fit the top left hinge (A) to the cabinet
using the screws (B) you removed earlier.
Before tightening the screws of the top
hinge, make sure that the top of the door
is level with the cabinet and that the
rubber gasket seals properly.
Finally, install the top cover (C) back.
Fridge door
Door stop
Door
bearing
C
A
29
Pin shaft
Pin shaft
Hole cover
B
Advertenties
Hoofdstukken
Inhoudsopgave
