Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. Remove the panel (t4). If it is necessary
use a screwdriver very carefully. Un-
screw the screw on the other side. Re-
move the upper door mount (t5). Place
them in an empty plastic bag.
t4
4. Remove the door.
5. Unscrew the screw and remove the
door stopper (d1). Attach it reversed on
the other side.
d1
6. Remove using a tool the cover (b1).
Unscrew the lower hinge pivot (b2) and
the spacer (b3) and place them on the
opposite side.
7. Re-insert the cover (b1) on the opposite
side.
t5
8. Re-insert the door on the pivot pin (b2).
Make sure that the edges of the doors
run parallel to the side edge of the ap-
pliance.
9. Position and fix the upper hinge (you
can find it in the instruction for use bag)
on the opposite side (t6).
10. Insert the panel (t7) (that can be found
in the instruction for use bag).
11. Make sure that the magnet (d7) is in its
position.
12. Open the door, attach the upper door
plastic trim (t2) using screws (t1). Close
the door.
electrolux 25
b1
b2
b3
t6
t7
Advertenties
Hoofdstukken
Inhoudsopgave
