Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1. INTRODUCTION
Thank you for choosing an Alessi DC to AC inverter. The Alessi inverter series are one of the most
sophisticated inverters available today. With high reliability, efficiency and sine quality as our most
important design goals, the Alessi inverter series is developed to serve you with safe and trouble free
operation for years.
Your Alessi inverter features an advanced micro processor control system with a MOSFET power
stage and a low loss toroidal transformer. This toroidal transformer in combination with well over
dimensioned power components, ensures a very reliable operation, so that extreme overload
conditions, like startup of compressors or pumps, can be handled safely.
To get optimal feedback from your inverter while operating, a build in diagnosis system will warn you
optically by different blinking sequences, depending on the error situation. See the troubleshooting
chapter for the blinking sequence table. Also, the inverter will warn you acoustically before it's going to
shut down in a bad battery, overload or high temperature condition. A bi-directional communication
port is available too, for future options like a remote panel or connection to a network of power
systems equipment.
To get optimal performance and safe operation from your inverter, it must be installed and used
properly. Please read this manual very carefully, especially the warning and caution statements,
before installing and using your Alessi inverter.
2. INSTALLATION
2.1
Placement of the inverter
y
x
1
1. Ceiling mounting
2. Floor mounting
3. Vertical wall mounting, fan at bottom :
4. Vertical wall mounting, fan on top
5. Horizontal wall mounting
For best operating results, the inverter should be placed on a flat surface. To ensure a trouble free
operation of the inverter, it must be used in locations that meet the following requirements :
a. Avoid any contact with water on the inverter. Do not expose the inverter to rain or moisture.
b. Do not place the unit in direct sunlight or other high temperature environments. Ambient air
temperature should be between 0 °C and 40 °C (humidity < 95% non condensing). Note that in
some extreme situations the inverter's case temperature can exceed 70 °C.
The Alessi-Serie
Pure Sine Wave Inverters
FAN
2
3
:
Only recommended when ceiling is fixed and not
removable
:
OK
OK (beware of small objects falling through the
ventilation openings on top)
:
Not recommended (reduces inverter capacity due to
insufficient cooling)
:
OK
- 4 -
FAN
4
5
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
