2.4 Electronics
•
If the power fails during use, immediately turn off the product and unplug the product.
•
Unplug and turn off the product when not in use and before cleaning the product.
•
Do not unplug the product by pulling the power cord. This may cause fire or electric
shock.
•
If black smoke comes out of the product, unplug the product immediately. Wait until the
smoke is gone before removing the contents of the product and contact our customer
service department.
•
Do not leave the cable hanging over the edge of a table or countertop.
•
Do not place the cable on hot surfaces or near oil.
•
Do not tuck the power cable under rugs or blankets. Never lay the cable in a walkway.
•
Do not move the product by pulling the cord or twist the cord.
•
Before connecting the product, make sure that the mains voltage indicated on the rating
plate matches that of your mains supply.
•
Make sure you do not trip over the cable and that the cable is not kinked, twisted, or
stuck.
•
Check both power cord and plug regularly for signs of damage or wear, and if there is
any, do not use the product and have the power cord and/or plug replaced or repaired
by authorized service personnel.
•
To avoid electric shock, do not use the product if you suspect the power cord or plug
is damaged. A damaged power cord or plug should be repaired or replaced by a
professional (an authorized distributor).
•
Use and store the product so that the cables cannot be damaged.
•
Use only the adapter and/or accessories provided by the supplier to prevent
overheating, explosions, electric shock, fire, other damage and personal injury.
•
Do not use an extension cord. Make sure the product is plugged into a grounded outlet
to which no other devices are connected.
•
The product is not suitable to be operated via an external timer or a separate remote
control.
•
Do not leave the product unattended when in use. When not in use, turn the product off
and unplug it.
•
Should the system that controls the internal temperature fail, the overheat protection will
automatically turn on and the product will not function. Unplug the product, let it cool
down completely and restart the product.
•
Never insert objects into the slots on the outside of the product, you may touch live
parts. This may cause fire and/or electric shock.
•
Do not move the product while it is on. Always turn the product off before moving or
cleaning it.
•
Turn off and unplug the product when you are not using or cleaning the product. Allow
the product to cool completely before cleaning the product.
•
Always use the product with a grounded indoor 220-240V~, 50/60Hz outlet.
English
29