Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4.2 AC/DC voltage measurements
1.
Insert the black test lead into the negative
COM terminal and the red test lead into
the positive V terminal
2.
Set the function switch to the V position
3.
Select AC or DC with the MODE button
4.
Connect the test leads in parallel to the
circuit under test
5.
Read the voltage measurement on the
LCD display
4.3
Resistance measurements
1.
Insert the black test lead into the negative
COM terminal and the red test lead into the
positive terminal
Set the function switch to the Ω
2.
position
3.
Touch the test probe tips across the circuit
or component under test. It is best to
disconnect one side of the device under test
so the rest of the circuit will not interfere with
the resistance reading
4.
For Resistance tests, read the resistance on the
LCD display
24
www.nieaf-smitt.com
•))) CAP
Advertenties
Hoofdstukken
Inhoudsopgave
