Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4
Measurements
Read and understand all warning and precaution statements listed
in the safety section of this operation manual prior to using this
meter. Set the function select switch to the OFF position when the
meter is not in use.
4.1 AC/DC current measurement
WARNING: Ensure that the test leads are disconnected from the
meter before making current clamp measurements.
1.
Set the Function switch to the
400 ADC, 40 ADC, 400 AAC
or 40 AAC range
2.
If the range of the measured is not
known, select the higher range
fi rst then move to the lower
range if necessary
3.
Press the trigger to open jaw.
Fully enclose one conductor
to be measured
4.
The clamp meter LCD will display
the reading.
23
www.nieaf-smitt.com
Advertenties
Hoofdstukken
Inhoudsopgave
