Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2. In the case of "Danfoss" valves, slide the
3. Screw the EASYmaxx thermostat onto the radia-
4. If you have not already done so, insert batteries
5. Use the button
6. Confirm the display "AdA" with
OPERATING MODES
Manual Mode
In manual mode, a constant temperature is set as
follows:
1. Press the button
01477_Inlay-de-en-fr-nl_70x120_V2.indb 23
01477_Inlay-de-en-fr-nl_70x120_V2.indb 23
adapter which fits the valve onto the valve and
fix it in place with the associated screw and
nut. Before fitting on valves of the RAV type, the
tappet extension that is also supplied must be
placed on the valve pin first (Picture F).
tor valve or the adapter (Picture D, E).
into the device (see the "Inserting Batteries"
chapter).
Then set the current time (minutes, hour) and
the day of the week using the button
and confirm with
vice adjustment process starts and this involves
the device adjusting to the control range of the
valve. This may take a few minutes. The
symbol flashes during this process.
Once the adjustment process is complete, the
device is ready to operate.
to switch on the display.
.
briefly until
or
. The de-
appears.
23
06.10.2022 13:41:13
06.10.2022 13:41:13
Advertenties
Hoofdstukken
Inhoudsopgave
