Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3 x 1.5 V batteries (AA) are required.
1. Take off the battery compartment cover on the
2. Insert batteries into the battery compartment.
3. Insert the battery compartment cover and close it.
If the
INSTALLATION AND PUTTING INTO
OPERATION
PLEASE NOTE!
■ Danger of burns from hot radiator valve. Wear
■ In a rented apartment, the permission of the
■ Do not apply any force during installation!
The screw ring of the EASYmaxx digital thermostat
for radiators fits on radiator valves with a thread
measuring M30 x 1.5 mm.
Three adapters are included for valves of the "Dan-
foss" brand (third-party trademark): Danfoss RA,
Danfoss RAVL, Danfoss RAV (Picture C).
1. Set the thermostat which is attached to the
22
01477_Inlay-de-en-fr-nl_70x120_V2.indb 22
01477_Inlay-de-en-fr-nl_70x120_V2.indb 22
back of the device.
Ensure the correct polarity (+ / –).
symbol flashes, replace the battery.
work gloves!
landlord is required before making any changes
to the radiator.
radiator to the highest value (to fully open the
radiator valve) and then take it off.
06.10.2022 13:41:13
06.10.2022 13:41:13
Advertenties
Hoofdstukken
Inhoudsopgave
