Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1 . Attach the concentrator nozzle
outlet
. Rotate the concentrator nozzle to
[
1 ]
adjust its orientation, if necessary .
2 . Switch on the product . Use the concentrator
nozzle
to direct the air flow onto a specific
2 ]
[
section of the hair .
3 . Removing the concentrator nozzle
air outlet
: Pull the concentrator nozzle off
1 ]
[
with a downward motion .
Using the cooling mode
NOTES:
After styling the hair: Use the cooling mode to
make the hairstyle last longer .
The cooling mode can only be selected when
the product is switched on .
Use the
button
o
mode on or off:
Cooling mode
button
[
3 ]
Press and hold
o
o
Release
o
o
˜ Cleaning and care
WARNING! Risk of electric shock!
m
Always switch off the product and disconnect
the mains plug
[
6 ]
before cleaning the product .
Do not immerse the product's electrical
components in water or other liquids . Never
hold the product under running water .
m
CAUTION! Do not use corrosive or abrasive
cleaning agents or material to clean the
product .
Remove the concentrator nozzle
o
air outlet
.
[
1 ]
to the air
2 ]
[
from the
[
2 ]
to switch the cooling
3 ]
[
Switched on
The product emits a
cool air flow .
Switched off
The cool air flow stops .
from the mains outlet
from the
2 ]
[
˜ Cleaning the housing and
concentrator nozzle
Wipe the housing and the concentrator
o
nozzle
with a slightly damp cloth .
[
2 ]
For stubborn soiling, add a mild cleaning
o
agent on the cloth .
Dry all parts thoroughly .
o
˜ Cleaning the air inlet
Wipe the air inlet
10 ]
[
o
˜ Storage
Store the product at a cool, dry place,
o
protected from moisture and out of the reach
of children .
Remove the concentrator nozzle
o
air outlet
.
[
1 ]
Fold the handle
4 ]
[
o
engages in position a .
Store the product in the original packaging
o
when it is not in use .
Alternatively, hang the product on its hanging
o
loop
.
7 ]
[
˜ Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities .
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics/20–22: paper and
fibreboard/80–98: composite
materials .
Product:
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product .
with a dry cloth .
from the
2 ]
[
until the foldable joint
9 ]
[
GB/IE/NI
11
Advertenties
Hoofdstukken
Inhoudsopgave
