Settings Via Circuit Board Controller; Adjusting The Water Temperature; Setting The Maximum Water Temperature For Cooling - Jaga BRIZA 22 Handleiding
Verberg thumbnails
Zie ook voor BRIZA 22:
- Installatiehandleiding (2 pagina's) ,
- Installatiehandleiding (92 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. SETTINGS VIA CIRCUIT BOARD CONTROLLER
4.1. ADJUSTING THE WATER TEMPERATURE
The unit starts from the set temperature
4.1.1. Setting the maximum water temperature for cooling
By setting the temperature lower, the unit will start later. If the water temperature is set higher, the unit
will start faster .
1. Start setup mode: hold the [-] button until
2.
INPUT: 110-240VAC
CO2
OUTPUT: 24V
PC / RF
N L
The blue LED
flashes quickly as soon as the mini-
mum temperature is reached.
Automatic control: The
set temperature
3. Exit setup mode: hold the [-] button until
4.1.2. set minimum water temperature heating
By setting the temperature higher, the unit will start later. If the water temperature is set lower, the
unit will start faster .
When using a heat pump, it may be necessary to set the water temperature at a lower setting .
1. Exit setup mode: hold the [+] button until
2.
INPUT: 110-240VAC
CO2
OUTPUT: 24V
PC / RF
N L
The blue LED
flashes quickly as soon as the
minimum temperature is reached.
Automatic control:
temperature .
3. Exit setup mode: hold the [+] button until
After 30 seconds, the new settings are automatically saved and the device returns to the
selected mode. .
32
/
18
28
the
Briefly press the [-] or [+] button to adjust the set tempe-
12 ̊ C
14 ̊ C
16 ̊ C
18 ̊ C
.
green LED
lights up when the water temperature (supply water) is lower than the
the
blue LED
the red LED
Briefly press the [-] or [+] button to adjust the set tempe-
rature .
24 ̊ C
26 ̊ C
28 ̊ C
30 ̊ C
.
The green LED
lights when the water temperature (supply water) exceeds the set
the red LED
.
blue LED
flashes 5x and release .
rature .
20 ̊ C
22 ̊ C
24 ̊ C
The red LED
flashes quickly as soon as the maxi-
mum temperature is reached.
flashes 5x and release .
flashes 5x and release .
32 ̊ C
34 ̊ C
36 ̊ C
The red LED
flashes quickly as soon as the maximum
flashes 5x and release .
26 ̊ C
PC / RF
N L
.
38 ̊ C
PC / RF
N L
temperature is reached.
.
INPUT: 110-240VAC
CO2
OUTPUT: 24V
INPUT: 110-240VAC
CO2
OUTPUT: 24V
Advertenties
Hoofdstukken
Inhoudsopgave
