Jaga BRIZA 22 Handleiding pagina 31
Verberg thumbnails
Zie ook voor BRIZA 22:
- Installatiehandleiding (2 pagina's) ,
- Installatiehandleiding (92 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Auto-change-over. The unit starts at the last selected speed(1, 2 or 3), as soon as the water
temperature > 28 ̊ C .
Auto-change-over. The unit starts at the last selected speed(1, 2 or 3), as soon as the water
temperature < 18 ̊ C .
Enkel bij configuratiecode DPC.BRC62 / DPC.BRC64
Non-condensing cooling possible if water temperature setting is adjusted.
The unit is in standby.
The unit can run at 3 speeds.
Control panel operation :
Press the button until the desired mode is reached (± 3sec).
3"
Standby
Manually raising / lowering the fan speed : press briefly
Speed 1
Red LEDs
are flashing in the set mode: the water temperature of the supplied water is too low
(Tw < 28 ̊ C ).
Blue LEDs
are flashing in the set mode: the water temperature of the supplied water is too high
(Tw > 18 ̊ C ).
3"
Speed 2
3"
Standby
3"
EN
Speed 3
31
Advertenties
Hoofdstukken
Inhoudsopgave
