Auto-Change-Over - Jaga BRIZA 22 Handleiding
Verberg thumbnails
Zie ook voor BRIZA 22:
- Installatiehandleiding (2 pagina's) ,
- Installatiehandleiding (92 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
C. AUTO-CHANGE-OVER
The unit automatically enters the desired operating mode ( or standby) based on the
water and room temperature. .
Only in combination with a suitable heat
pump and thermostat head for heating and
cooling !
4⁰C
2⁰C
The device automatically enters the cooling mode as soon as the water temperature is 4°C lower
than the room temperature. If the water temperature is less than 2°C lower than the room temperature,
the device will automatically switch to standby.
The device automatically enters the heating mode as soon as the water temperature is 4°C higher
than the room temperature. If the water temperature is less than 2°C higher than the room temperatu-
re, the device will automatically switch to standby.
Configuration code : DPC.BRC42 / DPC.BRC62 / DPC.BRC64
N L
C.1. FACTORY SETTINGS
C.1.1. With control pannel -
The device is controlled via auto-change-over. The unit starts as soon as the set water temperature
has been reached.
30
2⁰C
1⁰C
MODE
N L
(200-240V - 50Hz)
DPC.BRC42 / DPC.BRC62 / DPC.BRC64
2⁰C
Standby mode
1⁰C
[C]
INPUT: 110-240VAC
CO2
OUTPUT: 24V
PC / RF
Red not
connected
4⁰C
To(4P)
Tw
Tr
Advertenties
Hoofdstukken
Inhoudsopgave
