Led Indicator 2 Status; Led-Indicator - Tronic QI TCP 10 A1 Bedienings- En Veiligheidsinstructies
Verberg thumbnails
Zie ook voor QI TCP 10 A1:
- Gebruiksaanwijzing en veiligheidsinstructies (74 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. Place the mobile device on the Qi charging surface
. Make sure the center of the device is aligned
1
over the center of the Qi charging surface. Charging
will begin on contact. The LED indicator
blue when charging is active on Qi charging surface
. Protective covers that protect the mobile device
1
may interfere with the charging process. In this
case, the mobile device must be removed from the
protective cover.
NOTE: The charging power is up to 10 W,
*
depending on the power adapter used.
LED indicator
The product uses an LED indicator to show the
operating status:
LED indicator
Blue lights up two seconds Starting process
Blue lights up
Red is flashing
Red lights up
14 GB/IE/NI
status
2
Status
(Boot phase) / Standby
Charging/
Full Charge
Metal obstruction,
disruption
Incompatible adapter
or cable connected
2
lights up
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
