Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Level
4
5
6
7
8
9
REFRESH CONTROL MODE
The refresh control mode monitors the air quality in your kitchen / room. While the refresh control mode is activated,
the appliance switches on every 10 minutes at the lowest speed to refresh the air in the kitchen / room. After 24
hours, the refresh control mode stops automatically.
USING THE REFRESH CONTROL FUNCTION
1. Touch and hold the up button for 3 seconds to activate the refresh control function.
2. The dot flashes and the display shows 1..
The refresh control function now works for 24 hours.
SMART AIR SENSOR
The appliance has a sensor that automatically turns the hood on. This sensor detects the temperature, humidity and
VOCs (Volatile Organic Compounds). When in smart mode, the appliance activates upon detection of an increased
amount of one of these factors. The speed adjusts automatically between levels 1 to 3, based on the detected
humidity and VOCs, or heat.
ACTIVATING THE SMART AIR SENSOR
Note: When the smart air sensor is activated, the automatic switch-off mode can not be set.
1. Make sure that the appliance is on standby. The display shows a dot.
2. Touch and hold the down button for 2-3 seconds to activate the smart air sensor.
The display shows A.
When the appliance is activated by the sensor the display shows: 1., 2. or 3..
Deactivating the smart air sensor
1. To deactivate the smart air sensor, stop the appliance.
2. Hold the down button for 2-3 seconds.
USING THE LAMP
1. Touch the lamp button to activate or deactivate the lamp.
2. Hold the lamp button to dim the lamp.
STOPPING THE APPLIANCE
Note:
Make sure that the appliance operates for 5 to 10 minutes after you finish cooking.
1. Touch the decrease button to stop the appliance.
Time [min.]
40
50
60
70
80
90
English
•
31
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
