Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Assembly
Unpacking the product and
basic cleaning
1. Take the product out of the packaging and
remove all packaging materials and plastic
wrappings.
2. Check to make sure that all listed parts are
included (see "Scope of delivery").
3. Check whether the product and all parts are
in good condition. If any damage or defect is
detected, do not use the product, but follow
the procedure described in the "Warranty"
chapter.
4. Before first use: Clean all parts of the product
(see "Cleaning and maintenance").
Carry out the burn-in technique (see "Burn-in
technique").
Assembling the product
Refer to the illustrations at the end of this
booklet.
Fig. Description
Assemble the left side of the rack using
B
the rear left supporting leg
supporting leg
Assemble the right side of the rack using
the rear right supporting leg
C
right supporting leg
wall
.
[
]
Fit the base plate
D
side of the rack.
Set up the rack. Fit the back wall
E
the rack.
Turn the rack upside down. Fit the lower
F
cross member
Fit the wheels
G
rack so that it stands on the wheels.
Fit the upper cross member
H
door stop
[
]
I
Fit the gas bottle holder
, front left
[
]
and left side wall
[
]
, front
[
]
and right side
[
]
to the left and right
[
]
[
]
to the rack.
[
]
to the rack. Turn the
[
]
[
]
and the
[
]
to the rack.
to the rack.
[
]
Fig. Description
Fit the brackets for rear left supporting
J
leg
[
supporting leg
Fit the door handles
K
door
mounts for door handles
Fit the left door
L
the rack.
Fit the burner housing with lid
M
rack.
Fit the brackets for the side tray
N
the burner housing.
Fit the left side tray
O
housing
Loosen 6 screws from the side burner
Remove the lower part of the side burner.
INFO: This component and the
6 screws are needed again in
P
step U.
Fit the right side shelf cover
side burner.
Fit the side burner
.
[
]
Q
housing
Fit the side burner cover holders
R
the side burner
Fit the handle
cover
S
Fit the side burner cover to the side
burner
to
Fit the knob mount
T
to the right side shelf cover
Fit the lower part of the side burner
U
Connect the gas supply components
(detailed drawing).
Fit the handle
V
tray
and the brackets for front left
]
to the rack.
[
]
to the left
[
]
and right door
[
]
[
[
and right door
[
]
to the burner
[
6 ]
.
[
1 ]
to the burner
[
]
.
[
1 ]
.
[
]
to the side burner
[
]
.
[
]
.
[
]
and the knob
[
]
to the main burner drip
[
]
.
[
7 ]
using the
]
.
]
to
[
]
to the
[
1 ]
to
8 ]
[
[
]
.
[
]
to the
[
]
on
[
]
[
]
.
[
]
.
[
]
GB/IE/NI
7
Advertenties
Hoofdstukken
Inhoudsopgave
